|
Author
|
Topic: Upcomming Project Annoucement. - 1/1 scale CM.
|
DGeraths
Member Posts: 199
From: Salem, OR
Registered: Jan 2004
|
posted March 16, 2004 04:47 AM
   
Greetings all,
Recently I was commissioned by a private collector to build a 1/1 Apollo Command Module. This replica is to be exterior only and built in pre-entry condition.
I will be highlighting the construction process on my studios website and with luck, I will have a live studio cam going 24/7 so that interested parties can watch the CM's progress.
This craft will be entirely scratch built and will be made to the highest degree of realism possible. If you have any questions about the project or any of my other work please feel free to ask. I expect to begin the actual construction on or around the first week or April and have a tentative completion date of about the middle/end of June.
Currently I am researching the specifications of the craft as well as moving my entire studio to a new location that is large enough to accommodate this rather large project. Stay tuned for more updates. Dana Geraths www.GerathsDesign.com ------------------
Visit my Studios Website at http://www.GerathsDesign.com IP: Logged |
ejectr
Member Posts: 897
From: Brimfield, MA
Registered: Mar 2002
|
posted March 16, 2004 07:07 AM
Holy Moly.........Wish I could help!  IP: Logged |
WAWalsh
Member Posts: 663
From: Cortlandt Manor, NY
Registered: May 2000
|
posted March 16, 2004 07:31 AM
Even better, I wish I had room in the house to place such a replica and a spouse who would allow it. :-) Talk about a centerpiece for a room where one could place the rest of your collection.IP: Logged |
Hart Sastrowardoyo
Member Posts: 723
From: Toms River, NJ,USA
Registered: Aug 2000
|
posted March 16, 2004 09:00 AM
Now there's a place to display all the items Buzz Aldrin took with him to the moon....Hart IP: Logged |
tegwilym
Member Posts: 1709
From: Renton, WA USA
Registered: Jan 2000
|
posted March 16, 2004 01:10 PM
So do you do all this fun stuff and get paid for it? Like a real job? I'm so jealous!Tom
IP: Logged |
Robert Pearlman
Editor Posts: 12300
From: Houston, TX
Registered: Nov 1999
|
posted April 09, 2004 09:03 AM
As Dana noted in a subsequent post, the studio webcam is now live.IP: Logged |
MICHAEL CLEMENTE
Member Posts: 74
From: Atco, New Jersey, USA
Registered: Mar 2002
|
posted April 09, 2004 04:35 PM
Where on your website is the link for the live cam. Could not find it. Is it still to early? Can't wait to see it once it is done. Take care.IP: Logged |
DGeraths
Member Posts: 199
From: Salem, OR
Registered: Jan 2004
|
posted April 09, 2004 09:21 PM
Go to the main page at http://www.GerathsDesign.com and look at the bottom of the menu on the left. You will see a button that says "Studio Cam". Click on that and then click on the photo of the Command Module.Thanks for your interest! Dana ------------------
Visit my Studios Website at http://www.GerathsDesign.com IP: Logged |
DC Giants
Member Posts: 88
From: Kansas City, MO USA
Registered: Jun 2003
|
posted April 10, 2004 01:55 AM
I had the same question, but when I go to the website I cannot scroll all the way down on the left menu....IP: Logged |
DGeraths
Member Posts: 199
From: Salem, OR
Registered: Jan 2004
|
posted April 10, 2004 03:22 AM
The direct link to the cam is...rtsp://real.abac.com/live/GerathsDesign As of right now (12:16am) the cam will show as dark because it is closed up until tomorrow. Let me know if the link works. Your problem in seeing the site might have something to do with your browser. If you are using Netscape it might have problems viewing my site. Dana ------------------
Visit my Studios Website at http://www.GerathsDesign.com IP: Logged |
